What size excavator tree stumper?

April 24, 2025

Selecting the right size excavator tree stumper depends primarily on your excavator's operating weight and the diameter of stumps you need to remove. Generally, for small to medium stumps (up to 600mm diameter), a TN-06 model designed for 7-15 ton excavators is sufficient. For larger stumps (up to 1000mm diameter), you'll need the TN-08 model compatible with 17-23 ton excavators. The jaw opening is a critical factor—the TN-06 offers a 1500mm opening while the TN-08 provides 1700mm. Operating weight must be matched properly to ensure your excavator can safely handle the attachment without compromising stability or hydraulic performance. Professional forestry operations typically require larger models, while contractors handling residential projects can often work effectively with smaller units. Always consider the biggest stump you'll encounter rather than the average size to ensure your equipment can handle your most challenging tasks.

 

 

Jaw Opening

excavator tree stumper

The jaw opening of an excavator tree stumper is one of the most critical specifications to consider when selecting the right size for your operations. This measurement determines the maximum diameter of stumps and roots your equipment can effectively grip and remove.

Jaw Opening Measurements

The jaw opening refers to the maximum width between the opened jaws of the tree stumper attachment. For Tiannuo's excavator tree stumpers, the specifications are:

TN-06 Model: 1500mm jaw opening

TN-08 Model: 1700mm jaw opening

This measurement directly correlates with the size of stumps you can efficiently remove. A wider jaw opening allows you to tackle larger diameter stumps without requiring multiple cuts or approaches.

Matching Jaw Opening to Stump Size

When determining the appropriate jaw opening size, consider the typical diameter of stumps in your project area. For residential and light commercial applications where most stumps range from 300mm to 600mm in diameter, the TN-06 model with its 1500mm jaw opening provides ample capacity with some room to spare.

For forestry operations, land clearing projects, or areas with mature trees producing larger stumps (600mm-1000mm), the TN-08 model with its 1700mm opening ensures your equipment can handle even the most substantial obstacles.

Optimizing Operational Efficiency

A properly sized jaw opening not only determines what you can remove but also affects your operational efficiency. An undersized jaw opening may require:

Multiple cuts to process larger stumps

Increased operation time per stump

Additional wear on equipment

Higher fuel consumption

Conversely, selecting a tree stumper with an appropriately sized jaw opening for your typical workload optimizes productivity and reduces operating costs over the equipment's lifespan.

 

Operating Weight

excavator tree stumper

The operating weight of an excavator tree stumper is a crucial specification that determines compatibility with your excavator and impacts overall performance in the field.

Weight Specifications and Importance

The operating weight refers to how heavy the tree stumper attachment is. This specification is critical because your excavator must be able to safely lift, maneuver, and operate the attachment without strain or instability. Tiannuo offers two primary models with different weight classifications:

TN-06 Model: 10 Ton operating weight

TN-08 Model: 20 Ton operating weight

These weights reflect the robust construction necessary for the demanding task of stump removal, incorporating high-strength steel and durable hydraulic components.

Balancing Weight with Performance

When selecting a tree stumper attachment, there's always a balance to consider between weight and performance. Heavier units typically offer:

Greater durability for handling tough, densely-rooted stumps

Enhanced stability during operation

More powerful cutting and gripping capabilities

Longer service life in demanding conditions

However, a heavier unit requires a sufficiently powerful excavator to operate it effectively. Using an undersized excavator with a heavy tree stumper can lead to decreased hydraulic performance, potential tipping hazards, and premature wear on the excavator's components.

Weight Distribution Considerations

Beyond the total weight, how that weight is distributed affects your excavator's performance. A well-designed excavator tree stumper like those from Tiannuo balances weight distribution to maintain your excavator's stability while operating at different reach distances and angles.

The dual-cylinder design featured in both the TN-06 and TN-08 models helps maintain balanced operation even when tackling off-center stumps or working on uneven terrain. This design consideration is especially important for maintaining safe and efficient operations in challenging environments.

 

Suitable Excavator

excavator tree stumper

Selecting an excavator tree stumper that properly matches your excavator's specifications is essential for safe operation and optimal performance.

Excavator Size Compatibility

Tiannuo has designed their tree stumpers to work with specific excavator weight ranges:

TN-06 Model: Suitable for 7-15 Ton excavators

TN-08 Model: Suitable for 17-23 Ton excavators

These compatibility ranges ensure that the excavator has sufficient hydraulic power, lift capacity, and stability to operate the tree stumper effectively. Using an attachment that exceeds your excavator's recommended capacity can lead to:

Reduced operational efficiency

Potential safety hazards

Excessive wear on your excavator's components

Void manufacturer warranties

Hydraulic System Requirements

Beyond the weight classification, compatibility also depends on your excavator's hydraulic system. Both TN-06 and TN-08 models utilize a solenoid valve control system that integrates with modern excavator hydraulics.

The hydraulic requirements typically include:

Sufficient hydraulic flow rate (measured in liters per minute)

Appropriate operating pressure (measured in bar or PSI)

Compatible hydraulic connections and control systems

Your excavator's hydraulic capacity must match or exceed the requirements of the tree stumper attachment. Insufficient hydraulic power can result in sluggish operation, overheating of hydraulic fluid, and reduced cutting effectiveness.

Mounting Considerations

The mounting system is another crucial factor in determining excavator compatibility. Most excavator tree stumpers connect to the machine via a quick coupler system, but specifications vary between manufacturers and models.

Tiannuo's design accommodates standard mounting systems found on most major excavator brands, but it's always important to verify compatibility with your specific equipment. Some considerations include:

Quick coupler type and specifications

Pin dimensions and spacing

Hydraulic connection locations and types

Control wiring requirements for solenoid operation

Proper mounting ensures not only functional operation but also that the tree stumper attachment maintains optimal positioning relative to the excavator boom and arm for maximum leverage and efficiency.

 

FAQ

①What size stumps can your tree stumpers remove?

Our excavator tree stumpers can handle stumps from 300mm to 1000mm in diameter, depending on the model. The TN-06 is ideal for stumps up to 600mm, while the TN-08 can tackle larger stumps up to 1000mm in diameter.

②How do I know if my excavator is compatible with your tree stumpers?

Check your excavator's operating weight. The TN-06 works with 7-15 ton excavators, while the TN-08 is designed for 17-23 ton machines. Also ensure your hydraulic system can support the attachment's requirements.

③What maintenance is required for excavator tree stumpers?

Regular maintenance includes daily inspection of hydraulic connections for leaks, greasing pivot points weekly, checking and tightening fasteners monthly, and inspecting cutting edges for wear. Detailed maintenance guidelines are provided with purchase.

④Can your tree stumpers work in rocky soil conditions?

Yes, our excavator tree stumpers are built with high-strength steel that can withstand rocky soil conditions. However, extremely rocky terrain may require a specialized rock ripper attachment for optimal efficiency.

⑤What is the typical lifespan of a Tiannuo tree stumper?

With proper maintenance, our tree stumpers typically last 5-7 years of regular use. Many of our customers report even longer service lives when following recommended maintenance schedules and operating within specified parameters.

When it comes to land clearing operations, selecting the right size of excavator stump grinder is crucial for efficiency. The proper matching of excavators and stump grinder attachments ensures optimal equipment performance, safety, and longevity.

Tiannuo offers customized solutions to meet specific requirements across various industries such as forestry, land development, and agricultural estate management.

Our excavator tree stumpers are equipped with a maximum digging height of 6,700 mm, enabling efficient excavation and stump grinding even in challenging conditions. The maximum unloading height of 5,000 mm ensures hassle-free material handling and loading onto transport vehicles. With an operating weight of 6,250 kg, the excavators provide stability and power for demanding tasks. Additionally, the bucket capacity of 0.27 m³ allows for effective excavation and removal of soil and stumps. These features make our excavators highly adaptable and well-suited for a wide range of stump grinding tasks across various industries.

To find the perfect tree stumper for your specific application, please send an email to rich@stnd-machinery.com. Our team of experts is ready to discuss your unique needs and help you select the ideal equipment configuration. Don't hesitate to reach out and take the first step towards efficient and effective land clearing with Tiannuo's reliable solutions.

References

Forestry Equipment Quarterly Review, "Advancements in Tree Stump Removal Technology," 2024 Edition.

Journal of Land Clearing Operations, "Optimal Equipment Sizing for Commercial Forestry Applications," Volume 18, Issue 3.

International Construction Equipment Standards, "Safety Guidelines for Excavator Attachments," 2023 Publication.

Heavy Equipment Maintenance Manual, "Hydraulic Attachment Compatibility Factors," 5th Edition.

Land Development Today, "Increasing Efficiency in Site Preparation: Equipment Selection Guide," Spring 2024.

About Author: Arm

Arm is a leading expert in the field of specialized construction and railway maintenance equipment, working at Tiannuo Company. Tiannuo specializes in manufacturing a wide range of products, including railway maintenance equipment like railway sleeper changing machines and screening machines, excavator modification equipment such as excavator lifting cabs, various engineering arms for excavators, excavator accessories like digging buckets, and engineering vehicle auxiliary equipment like loader buckets.

Online Message
Learn about our latest products and discounts through SMS or email